Installation - Haier HDW15F3S1 User Manual

Installation

WARNING!
Any installation may be carried out only by a qualitied technician
refer to section SAFETY.
Free Standing Installation
Install the appliance on
ground. Adjust accurately all feet
Only with a correct level the
appliance door closes and seals
correctly.
Installation under Worktop
5
solid
Optional:Remove the work top of
1.
the appliance.
2. Adjust accurately all feet to get a
firm level position.
3. Stick the water-proof sticker on the
bottom of the kitchen board
4. Install the appliance carefully into
the recess.
WARNING!
If used as free standing appli-
ance again, the worktop must be
remounted.
5. The dimensions of the recess should
at least agree with the dimensions in
.
6. After installation, the minmum gap
between the side planel and the
cupboard is 1mm, and the minmum
gap between the rear and the cupboard
is 10mm. The top gap is controlled
by adjusting the feet.
7. Put the appliance adjacent to the
slot. Make sure that all connections
(water, drain water, power) are neatly
positioned and connected.
NZ AU