Table of Contents
Advertisement
2. See STEP 5A "Install the Drain Hose" for instructions to connect the drain hose
to waste tee or garbage disposal using one of the following options:
•
Option 1 - Garbage Disposal - With Air Gap
•
Option 2 - No Garbage Disposal - With Air Gap
•
Option 3 - Garbage Disposal - No Air Gap*
•
Option 4 - No Garbage Disposal - No Air Gap*
*an air gap is recommended
STEP 6- POSITION THE WATER LINE AND HOUSE
WIRING
Disconnect electrical power at the fuse box or circuit breaker box
before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Confirm power is turned off at the source.
2. Turn off water supply.
a
3. Place the water supply line and the house wiring on floor of the opening to avoid
interference with the base of the dishwasher and the components under the
dishwasher.
4. Tape the wire to the floor 6" (15.2 cm) in front of unit. This will keep the wire from
moving when the dishwasher is moved into cabinet opening.
WARNING
Electrical Shock Hazard
4"
(10.2 cm)
6"
(15.2 cm)
b
a
Copper Supply Line
b
House Wiring
19
Advertisement
Table of Contents
