Table of Contents
Advertisement
EDITION 02/2008
OPERATING MANUAL
4
DESCRIPTION
4.1
FIELDS OF APPLICATION, USING IN ACCORDANCE WITH THE INSTRUCTIONS
The gun is suitable for atomising liquid materials, particularly coating materials, using the
AirCoat process.
4.1.1
PROCESSIBLE MATERIALS
Top-coat paints, primer paints, corrosion protection solvents, textured paints, lyes, staining
solvents, clear paints, parting solvents, etc. on a solvent or water basis.
Hot coating substances!
Burns
SIHI_0019_GB
Note:
In the event of application problems consult your Wagner branch and/ or the
paint manufacturer.
4.2
SCOPE OF DELIVERY
These AirCoat gun is available in two different variants. The nozzle size depends on the
paint and on the application. Therefore the air cap and the nozzle are not included in the
scope of supply. For a gun accessories look in chapter 9.
4.2.1
VARIANT FOR APPLICATION RANGE UP TO 16 MPA; 160 BAR; 2320 PSI
Qty
Part No.
1
0394004
4.2.2
VARIANT FOR APPLICATION RANGE UP TO 25 MPA, 250 BAR, 3625 PSI
Qty
Part No.
1
0394014
4.2.3
STANDARD EQUIPMENTS
The standard equipment includes:
0394004
0394014
Qty
Qty
1
1
1
1
1
1
For special versions the delivery note applies.
Part No. DOC394861
Wear antistatic protective gloves.
When operating the unit with a coating material with a temper-
ature greater than 43°C; 109.4°F: Identify the unit with a warning
sticker "Warning - hot surface".
Description
GM 4600AC 16 MPa; NPSM1/4" Paint connection
Description
GM 4600AC 25 MPa ; NPSM1/4" Paint connection
AirCoat hand gun GM 4600AC
Part No.
Description
0394891
CE-conformity
394860
Operating manual German
see chap. 1
Operating manual for the other language
WARNING
GM 4600AC
12
Advertisement
Table of Contents
