Table of Contents
Advertisement
EDITION 02/2008
OPERATING MANUAL
6.0
MAINTENANCE
➞ Observe general safety instructions in chapter 2.
The spray gun and the unit must be cleaned every day. Use only the cleaning solvent rec-
ommended by the material manufacture.
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Never immerse the spray gun in cleaning agent.
SIHI_0066_GB
Incorrect maintenance/repair!
Risk of injury and damage to the equipment
SIHI_0004_GB
Part No. DOC394861
CAUTION
Repairs and part replacement may only be carried out by spe-
cially trained staff or a WAGNER service center.
Before all work on the unit and in the event of work interrup-
tions:
- Switch off the energy/compressed air supply.
- Relieve the pressure from the spray gun and unit.
- Secure the spray gun against actuation.
Observe the operating and service instructions when carrying
out all work.
WARNING
GM 4600AC
24
Advertisement
Table of Contents
