Attaching Seat Rails To Frame - First Degree Fitness E-520 Fluid Rower Owner's Manual

Caution:
Rower Belt Pulley
Remove mainframe and all components from mainbox. Check that all parts are pre-
sent. Slowly stand Rower mainframe upright.
Bungee Shock Cord
Locate and unwrap the Bungee Shock Cord from
the frame before moving on to the installation of
the Seat Rails.
Do not free the Rowing Handle, Heel Adjuster or Computer
Stalk before assembly is complete.
Hint: Use mouse pad or soft cloth
under rower belt pulley to protect
from scratches/scuffing
Once the rower is safely standing upright
on a stable surface, locate and unbox
the left/right Seat Rails and hardware kit
for the next step of assembly.
Note: The seat assembly bolts (4x
M6x20) are pre-installed on the rower
seat.
CAUTION: The FLUID ROWER com-
ponents such as mainframe and seat
rails are heavy. Use care during assem-
bly.
WARNING: The FLUID ROWER seat
rails can have sharp edges on the front
portion facing the mainframe.
Use caution during assembly.
7