Installing The Rear Leg For - First Degree Fitness E-520 Fluid Rower Owner's Manual

Installing the Rear Leg for VX-3
Rear Leg
Rear Leg[4], 5x10x47.5 bolts[11],
5xM10 washers[15], M6x20mm bolts
[9] and M6 washers[14]. Mount the
Rear Leg onto Seat Rails and Secure as
shown .
Install all M10x47.5 bolts first from the
outside to hold the Rear Leg in position
before securing from the inside with the
M6x20mm bolts and M6 washers.
Note: Third bolt hole on right of
Rear leg and Seat Rail is for
bungee hook attachment.
M6x20mm bolt[9] and M6 washer[14]
M10x47.5mm bolt[11] and M10 washer
[15]
11