First Degree Fitness E-520 Fluid Rower Owner's Manual page 24

Tilt Spacer slightly
The Joiner should be able to reach this posi-
tion.
Note: A light tap may be required if the black inner Spacer will not pass inside the
frame.
Reassemble. Note: A tight C-Clip mounting indicates the process should be
repeated as the belt is jammed up.
Feed the new Bungee Cord from below
and reattach end strap to the Belt Pulley.
Ear Strap
Attach the Spacer to the end of the rower
Ear
pulley and use the "ear" to help thread
the strap into the machine. Note that the
Spacer may require being tilted just
slightly to allow it to pass through.
Reattach the Bungee Hook to the end of
the Seat Rail, install outer Spacer, C-Clip
and Sticker. Test for proper installation.
If the C-Clip cannot be reinstalled, then
remove Pulley and try again as the Strap
may be jammed.
24