Installing The Rear Leg For E-520 - First Degree Fitness E-520 Fluid Rower Owner's Manual

Installation Rear Leg for E-520
4x M10x47.5mm
Bolt and M10
Washer
M6x20mm
Bolt and M6
Washer
Seat Indentation
faces rearward
Rower Seat is heavy. Grasp firmly and
use both hands to guide the Rower Seat
down the Seat Rail.
Requires 4x M10x47.5mm bolt[11], 4x
M10 washer[15], 4x M6x20mm bolt[9]
and 4x M6 washer[14].
Rear Leg
4x M6x20mm Bolt
and M10 Washer
Note: the M10x47.5 bolts[11]/washers
[15] are to be installed on the outside of
the Seat Rail, while the smaller,
M6x20mm bolts[9] and washers[14]
are fitted on the inside.
M10x47.5mm
Bolt and M10
Washer
13
CAUTION