Attaching Seat Rails to Frame
Left Seat
Seat Rail Attachment
Points
Left Seat Rail
This portion of the assembly requires the
Mainframe, 1xLeft/1xRight Seat Rail[2],
2xM10x70mm Bolt for E-520
(2xM10x70mm Bolt for VX-3) [12],
4xM10 Nylock nut[16].
Right Seat
*Note: 2x M10x70mm bolt for E-520(2x
M10x80mm bolt for VX-3)/spacer are pre
-installed on the Seat Rails for your con-
venience.
Align and secure lower attachment
points using M10x70mm bolt for E-520
(M10x70mm Bolt for VX-3) [12], M10
Nylock nut[16] and M10 washers[15].
Begin with Left Seat Rail[2]. Align using
the pre-installed M10x70mm bolt for E-
520 (M10x70mm Bolt for VX-3) [12] as
shown.
Secure from behind with M10 Nylock
nut[16].
8