Naming An Audio File - Kenwood TS-990S Instruction Manual

13 VOICE MESSAGE AND AUDIO FILE
Note:
◆ While the Audio File (USB) screen is open, press [FOLDER] (F1)
to change the folder storing the file.
◆ The Audio File (USB) screen will not appear if no USB flash drive
is connected to or correctly recognized by the transceiver.
◆ Prior to removing a USB flash drive, be sure to execute "Safe
Removal of the USB Flash Drive"
You can do the following operations while playing an audio
file.
Operation
Hold down [FF▶▶] (F6).
Hold down [◀◀REW] (F2).
Press [||PAUSE] (F3).
Press [NEXT▶▶] (F7).
Quickly press
[◀◀PREV] (F1) twice.
Press [◀◀PREV] (F1) once.
Press [■STOP] (F4).
Press [ESC].
Rotate the MULTI/CH control.
Note:
◆ Prior to removing a USB flash drive, be sure to execute "Safe
Removal of the USB Flash Drive"
13-8
{page 12-1}
Action
Fast forwards the audio file. Release
the key to return to normal play speed.
Fast rewinds the audio file. Release the
key to return to normal play speed.
Pause the audio file. Press [PLAY]
(F3) again to resume from the paused
location.
Plays the audio file (the one before the
current file) from the beginning.
Plays the audio file (the one after the
current file) from the beginning.
Plays the current audio file once more
from beginning.
Ends playing the audio file.
Closes the Audio File Play screen and
Recorded Audio File List screen.
If two or more audio files are saved, you
can cue the audio file.
{page 12-1}.

NAMING AN AUDIO FILE

You can name an audio file saved in internal memory or
USB flash drive.
To use a USB flash drive, insert a USB flash drive in
(USB-A) and be sure that the transceiver has recognized
the USB flash drive.
[ ESC ]
[ F1] [F7 ]
1 Press [RX PLAY] (F1) to open the Audio File screen.
2 Press [INT.MEM] (F7) or [USB MEM] (F7) to alternate
the screen.
• Press [INT.MEM] (F7) to open the Audio File (Internal)
screen.
• Press [USB MEM] (F7) to open the Audio File (USB)
screen.
• If [INT.MEM] (F7) or [USB MEM] (F7) is unavailable in the
function key guide, press [MORE] (F1). An alternate key
guide will appear.
• If the Audio File (USB) screen appears with a press of
[USB MEM] (F7), pressing [FOLDER] (F1) switches the
folder to refer to. The file recorded with the timed task is
stored in the TIMER_REC folder and other files are stored
in the RX_REC folder.
3 Press [ ] (F2) or [
MULTI/CH control to select an audio file to be named.
4 Press [NAME] (F5) to enable editing of the audio file
name.
If [NAME] (F5) is unavailable in the function key guide, press
[MORE] (F1). An alternate key guide will appear.
[ MULTI/CH ]
] (F3), or rotate the
Index Contents