Kenwood TS-990S Instruction Manual page 216

14 VOICE GUIDANCE
The following announcements are made upon a press of [VOICE] (M) or [VOICE] (S). The announced content differs
depending on the screen being displayed.
Screen
Auto Mode
ANT name
Preselector
AGC
AGC copy
AGC disabled
Equalizer
Equalizer configuration
Copying the equalizer
configuration
Reading the equalizer data
Reading a file
Selecting the data block to
be read (DATA)
Processing
Data load complete
Verify data save (RXEQ)
Saving the data
14-4
Operation/Status
To display a screen
When [VOICE1] is pressed
Focus shift
Copying a frequency to list
Switching On/Off
When the screen opens or
[VOICE1] is pressed
Focus shift
Displaying the Antenna Name
Entry screen
When the screen opens or
[VOICE1] is pressed
Shift
Aligning with center
When the screen opens or
[VOICE1] is pressed
Changing a value
Switching the AGC speed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
Focus shift
When the screen opens or
[VOICE1] is pressed
Focus shift
Changing a value
Initializing
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
Focus shift
When the screen opens or
[VOICE1] is pressed
Editing a name
When the screen opens or
[VOICE1] is pressed
Focus shift
(Environment dependent)
Focus shift (CW)
Focus shift (Recording)
Focus shift (Voice Message)
Switching On/Off
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
"Auto" + frequency on the top of the list + Mode
"Auto" + Operating frequency
"Copy" + Frequency + Mode
"Antenna Name" + number
"Preselector" + Value (–20 to +20)
"AGC" + (Fast/Middle/Slow) + Value
(Fast/Middle/Slow) + Value
"AGC" + "Off" + "OK?"
(RX/TX) + "Equalizer" + (HB1/HB2/FP/BB1/BB2/F/C/U1/U2/U3)
(HB1/HB2/FP/BB1/BB2/F/C/U1/U2/U3)
(RX/TX) + "Equalizer " + "Adjust"
(0/0.3/0.6/0.9/1.2/1.5/1.8/2.1/2.4/2.7/3.0/3.3/3.6/3.9/4.2/4.5/4.8/5.1)
+ (+/-) + "dB", or "0 dB"
(+/-) + Value + "dB" (does not announce "plus minus" in the case of 0 dB)
"File list" + "RX" + "Equalizer"
"File list" + "TX" + "Equalizer"
Year + Month + Date + Time
"Read" + "Data" + "Select"
"CW message" + (On/Off)
"Record" + "Message" + (On/Off)
"Message" + "Record" + (On/Off)
"Voice Message" + (On/Off)
(No voice guidance while reading using RXEQ and TX EQ)
Announced Content
Frequency + Mode
"Auto" + (On/Off)
Number
"Edit"
Value (–20 to +20)
"Center" + Value (0)
"AGC" + "Off"
Value
"Copy" + "OK?"
No announcement
"Copy" + "OK?"
"Read" + "OK?"
"File list" + "Data"
"Clear" + "OK?"
"Edit"
"ENV" + (On/Off)
(On/Off)
"Please wait"
"Completed"
"Save" + "OK?"
"Completed"
Index Contents