Configuring The Screen Saver Wait Time; Configuring The Text String For Screen Saver - Kenwood TS-990S Instruction Manual

16 USEFUL FUNCTIONS

CONFIGURING THE SCREEN SAVER WAIT TIME

You can configure the length of time from when you
operate the transceiver last until the time when the screen
saver activates.
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access Menu 05, "Screen Saver Wait Time".
3 Press [SELECT] (F4) to allow editing of the parameter
box.
4 Press [-] (F4) or [+] (F5), or rotate the MULTI/CH
control to configure the wait time until the screen saver
will be activated.
You can select from "Preview [5 sec]" (displaying the screen
saver for five seconds to preview), "5 [min]", "30 [min]", or "60
[min]".
5 Press [ ] (F1).
6 Press [MENU] to exit.
16-2
CONFIGURING THE TEXT STRING FOR
SCREEN SAVER
You can configure the text string if you select Type 2 for
the Screen Saver. While the screen saver is active, the
entered text string moves freely across the main screen
and the sub-screen.
1 Select Group No. 0, "Basic Configurations", from the
Menu screen.
2 Access Menu 06, "Screen Saver Message".
3 Press [EDIT] (F4) to allow editing of the parameter box.
4 Use the function keys and the MULTI/CH control to edit
or enter a text string.
You can enter a maximum of 10 characters.
[SPACE] (F1): Press to enter a space.
[-] (F2)/[+] (F3): Press to display the previous character or
the next character.
] (F4) and [
[
the left or right.
[BACKSPACE] (F): Press to delete the character to the left of
the cursor.
[CHAR] (F): Press to delete the character to the right of the
cursor.
[CHAR] (F): Press to change the character type. Each time
you press [CHAR] (F), the character type cycles through the
following sequence:
ABC (upper case) > abc (lower case) > ÀÁÂ (upper case) >
àáâ (lower case) > !"# (symbols) > ABC (upper case)
5 Press [SAVE] (F6) to save the text string.
6 Press [MENU] to exit.
] (F5): Press to move a pointer to
Index Contents