Kenwood TS-990S Instruction Manual page 221

Screen
Confirming the memory
reset
Confirming the menu reset
Reset in progress
Extended menu item
display
Advanced Menu
Adjustment screen
Changing the configuration value
Adjusting the touch panel
(Main Screen)
Touch panel adjustment
completed
Advanced menu
License display
Error/Warning message
Message
(Excluding the
Configuration for
Emergency Contact
Frequency screen)
When displaying the
Emergency Contact
Frequency screen
Note:
◆ Refer to "PF key configurations" for options when configuring PF keys.
announced even when the leading digit is "0".
◆ When various errors, warnings, or information messages appear while displaying the configuration screen, the contents of various errors,
warning, or information message are announced.
◆ When reading an equalizer file while pressing [RXEQ] or [TXEQ], "Please wait" is not announced.
◆ The microphone VOX gain value is not announced.
◆ When announcing frequency value in VFO mode, the displayed values are announced from the upper digit. The separators for MHz are
announced as "dot".
Contents Index
Operation/Status
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
When the screen opens or
[VOICE1] is pressed
Announced Content
"Memory reset" + "OK?"
"Menu Reset" + "OK?"
"Please wait"
"Advanced Menu" + Number (2 digits)
Number + Value
Value
"Touch Screen" + "Calibration"
"Completed"
"License"
(Error/Warning) + Number
"OK?"
"Emergency" + "Frequency"
{page 16-8} Menu numbers and Memory Channel numbers are
VOICE GUIDANCE 14
14-9