Audio Files; Playing An Audio File - Kenwood TS-990S Instruction Manual

AUDIO FILES

On the Audio File screen, you can operate the transceiver
using the audio file stored in the internal memory or USB
flash drive.
[ ESC ] [ F1] [F7 ]
COPYING AUDIO FILE FROM INTERNAL MEMORY TO
USB FLASH DRIVE
You can copy the audio file stored in the internal memory
to a USB flash drive.
To use a USB flash drive, insert a USB flash drive in
(USB-A) and be sure that the transceiver has recognized
the USB flash drive.
1 Press [RX PLAY] (F1) to open the Audio File screen.
2 Press [INT.MEM] (F7) to display the Audio File
(Internal) screen.
3 Press [ ] (F2) or [
MULTI/CH control to select the audio file to be saved in
USB flash drive.
If [ ] (F2) and [
the function key guide, press [MORE] (F1). An alternate key
guide will appear.
4 Press [SAVE] (F4).
• A message prompting you to save the configuration data
appears.
• Press [CANCEL] (F) to close the Data Save
Confirmation screen and return to the Audio File
(Internal) screen.
If [SAVE] (F4) is unavailable in the function key guide, press
[MORE] (F1). An alternate key guide will appear.
5 Press [OK] (F4) to save the audio file.
6 Press [ESC] to exit.
Note:
◆ Prior to remove a USB flash drive, be sure to execute "Safe
Removal of the USB Flash Drive"
Contents Index
[ MULTI/CH ]
] (F3), or rotate the
] (F3) are unavailable in
{page 12-1}
VOICE MESSAGE AND AUDIO FILE 13

PLAYING AN AUDIO FILE

You can play an audio file saved in internal memory or
USB flash drive.
To use a USB flash drive, insert a USB flash drive in
(USB-A) and be sure that the transceiver has recognized
the USB flash drive.
[ USB ] [ ESC ]
[ F1] [F7 ]
1 Press [RX PLAY] (F1) to open the Audio File screen.
2 Press [INT.MEM] (F7) or [USB MEM] (F7) to alternate
the screen.
• Press [INT.MEM] (F7) to open the Audio File (Internal)
screen.
• Press [USB MEM] (F7) to open the Audio File (USB)
screen.
• If [INT.MEM] (F7) or [USB MEM] (F7) is unavailable in the
function key guide, press [MORE] (F1). An alternate key
guide will appear.
• If the Audio File (USB) screen opens with a press of [USB
MEM] (F7), pressing [FOLDER] (F1) to switch the folder
to refer to. The file recorded with the timed task is stored
in the TIMER_REC folder and other files are stored in the
RX_REC folder.
3 Press [ ] (F2) or [
MULTI/CH control to select an audio file to be played.
4 Press [PLAY] (F4) or [PLAY] to play the audio file.
[ MULTI/CH ]
[ PLAY ]
] (F3), or rotate the
13-7