Mitsubishi Lancer Evolution-VII Workshop Manual page 159

7-14
FUNCTIONS AND CONTROL OF SWS ECUS
The following functions are controlled by the SWS ECUs:
No. Functions
1 Lamp still ON reminder warning function
2 Central door lock control function
3 Power window timer function
4 Windshield wiper washer control function
5 Headlamp auto-cut function
6 Flasher timer function
7 Rear fog lamp function
8 Dimmer type room lamp control function
Tail lamp, fog lamp, or
ON
headlamp
OFF
Ignition
OFF
s w i t c h
position
ON (ACC)
(Open) ON
Driver's
seat door
(Closed) OFF
switch
(Sounds) ON
B u z z e r
(Does not sound)
output
OFF
ON
Lock switch
OFF
ON
Unlock switch
OFF
ON
Lock relay output
OFF
Unlock relay output ON
OFF
t: 0.25 seconds
EQUIPMENT –
Smart Wiring System (SWS)
LAMP STILL ON REMINDER WARNING FUNCTION
When the tail lamp, fog lamp, or headlamp is ON, if the ignition
switch is in "OFF" position and the driver's door is opened,
a buzzer will sound continuously to warn that the lamp is
illuminated. However, if the tail lamp or headlamp has been
turned off by the headlamp auto-cut function, the buzzer will
not sound.
CENTRAL DOOR LOCK CONTROL FUNCTION
When the driver's seat door is locked (after the unlock switch
in the driver's seat door lock actuator is turned OFF, the
lock switch is turned ON), the ETACS-ECU activates the lock
relay output for 0.25 seconds and locks all doors. Next, when
the driver's seat door is unlocked (after the lock switch in
the driver's seat unlock actuator is turned OFF, the unlock
t
switch is turned ON), the ETACS-ECU activates the unlock
relay output for 0.25 seconds and unlocks all doors.
t
Control ECU
ETACS-ECU, column switch
ETACS-ECU
ETACS-ECU, power window main switch
ETACS-ECU, front ECU, column switch
ETACS-ECU, front ECU, column switch
ETACS-ECU, column switch
ETACS-ECU
ETACS-ECU