Cooling System; Specifications - Mitsubishi Lancer Evolution-VII Workshop Manual

COOLING SYSTEM

The cooling system is a water-cooled pressurized, forced circulation type which offers the following features.
To improve the reliability of cavitation at a high engine speed and to increase the amount of engine
D
coolant, output control system in which a thermostat is installed at the outlet of engine coolant from
the engine to the radiator has been adopted.
To improve the engine cooling performance and save weight, a plastic tank and an aluminium radiator
D
fins have been introduced.
The speed of electric cooling fan is optimally controlled by a radiator fan controller and the engine-ECU
D
according to driving conditions so that the fan operating noise is minimized and the fuel efficiency
is improved.

SPECIFICATIONS

Items
Cooling method
Radiator Type
Performance kJ/h
Water pump Type
Drive method
Thermostat Type
Valve open temperature _C
CONSTRUCTION DIAGRAM
Radiator fan
motor
Radiator fan
controller
ENGINE -
Cooling System
Specifications
Water-cooled pressurized, forced circulation with electrical fan
Pressurized corrugate type
216,700
Impeller of centrifugal type
Drive belt
Wax pellet type with jiggle valve
80 ± 1.5
Shroud
Reserve tank
Radiator
1-5