Install the hard drive.
3.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
4.
SATA hard drive LED
Removing a hot-plug hard drive
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
1.
SATA hard drive LED
Back up all server data on the hard drive.
2.
Remove the hard drive.
3.
combinations" on page 16).
combinations" on page 16).
("SAS and
("SAS and
Hardware options installation 50