HP ProLiant ML370 G5 User Manual page 69

Tighten both internal rack bezel thumbscrews.
12.
Partially insert the CD-ROM drive horizontally into the slot below the media bay spacer.
13.
Connect the IDE CD-ROM drive cable and power cable.
14.
Push the CD-ROM drive all the way into the bay until the locking latch clicks into place, securing the
15.
drive.
Install the media blanks horizontally in the bay below the CD-ROM drive.
16.
NOTE: Install any optional tape drives
instead of the media blanks at this time.
("Installing a half-height or full-height media device" on page 54)
Hardware options installation 69