Removing Expansion Boards - HP ProLiant ML370 G5 User Manual

Close the slot release lever and lock the retainer clip.
7.
Connect any required internal or external cables to the expansion board. Refer to the documentation
8.
that ships with the expansion board.
Install the access panel.
9.
Do one of the following:
10.
•
Close or install the tower bezel, as needed.
•
Slide the server back into the rack.

Removing expansion boards

CAUTION: To prevent damage to the server or expansion boards, power down the server and remove all
AC power cords before removing or installing the expansion boards.
To remove the component:
Power down the server (on page 20).
1.
Do one of the following:
2.
•
Open or remove the tower bezel, as needed
•
Extend the server from the rack (on page 22).
Remove the access panel (on page 25).
3.
Disconnect any cables attached to the expansion board.
4.
("Open or remove the tower
Hardware options installation 62
bezel" on page 21).