Installing A Hot-Plug Scsi Hard Drive; Removing A Hot-Plug Scsi Hard Drive - HP ProLiant DL380 Generation 4 User Manual

NOTE: The server ships standard with five hard drive blanks.

Installing a hot-plug SCSI hard drive

Remove the existing hard drive blank or hard drive from the drive bay
1.
hard drive" on page 45).
Install the hard drive.
2.
Determine the status of the hard drive from the hot-plug hard drive LEDs
3.
LEDs" on page 18).
Resume normal server operations.
4.

Removing a hot-plug SCSI hard drive

CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Determine the status of the hard drive from the hot-plug hard drive LEDs
1.
LEDs" on page 18).
("Removing a hot-plug SCSI
("Hot-plug SCSI hard drive
("Hot-plug SCSI hard drive
Hardware options installation 45