Line Learning Adjustment - Shimano BeastMaster 9000 Instruction Manual

Line Learning Adjustment

Set the target depth more accurately by correcting the discrepancy
between the depth shown on the display and the markings on the line.
Line Learning
Adjustment
1
Effective at a depth of more than 10m.
Round up the present depth displayed to a
convenient number (round decimal points
to 0) to easily match it with the markings
on the line. The color of the line changes
every 10m.
* More accurate adjustment is possible at
depths greater than 100m, such as when
the display changes from 199m to 200m.
ワンタッチ
Press several times Enter
2
Enter Line Learning Adjustment using either
There are two methods for making adjustments. The same adjustments can be made using either method.
From the Menu Screen
Press and hold the MENU button
seconds and the Menu Screen will appear.
▼ s e v e r a l t i m e s a n d s e l e c t
P r e s s
CALIBRATE and press SET.
(See pages 12 for details regarding Menu Screen
operation.)
OR
Peep-Peep
Hold
Press and hold both the 0-set and MENU buttons for 3 seconds.
A or B.
Using the buttons
for 3 Press and hold both the
but tons
Learning Adjustment.
You will hear two short beeps.
※ When using this method, after calibration is
completed you will return to the Water Depth
Display.
Peep-Peep
1 1
0-SET and MENU
for 3 seconds to enter Line
(Continued on the next page.)
61