Table of Contents
Advertisement
Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ.
Hold
4
After completely finishing winding on the
line, press the MENU button for more than
3 seconds.
The alarm will sound (peep-peep).
Note:
Do not wind on all of the line. If all of the line is
wound on, it will cause an error in the counter
value.
28
Peep-Peep
Remove
10m
5
Accurately pull out 10m of line. (Check
the changes in colour every 10m, or the
number of marks occurring every 1m.)
To finish learning, press the MENU button
for more than 3 seconds.
The alarm will sound (peep-peep).
Peep-Peep
Wind on 10m
6
The display will return to Standard Mode
and learning will be complete.
(In some cases there may be as much as a ±3%
difference between the counter value and the actual
length of the line.)
* This difference is the difference in the first cast made after
learning.
* After this when actually fishing, if you think that the
difference is too great, carry out Line Learning Adjustment
as shown on pages 61. This will enable you to position
your rig more accurately.
7
Wind on the 10m of line that was pulled out.
Hide quick links:
Advertisement
Table of Contents
