Table of Contents
Advertisement
Before using this reel, please make sure you read the manual thoroughly and keep it in a safe place for future reference.
Safety Precautions ................................................................................................................2
Features ...............................................................................................................................8
Digital Display Component Names .....................................................................................10
Part Names .........................................................................................................................11
Menu Button Operation .....................................................................................................12
Power Supply | Cord ..........................................................................................................14
Learning Methods ..............................................................................................................16
Learning Methods (Flow Diagram) ....................................................................................18
Learning Methods 1. PE Line (Line with markings every meter.) ........................................20
Learning Methods 2. Nylon Line (Line with no markers.) ...................................................22
Learning Methods 3. Backing Line .....................................................................................24
What to do after completing Learning ...............................................................................28
Various Techniques .............................................................................................................30
Zero Setting .......................................................................................................................32
Adjusting Smart Line Depth ...............................................................................................34
INSTRUCTION MANUAL
Thank you for purchasing a Shimano DENDOUMARU 1000 PLAYS / 4000 PLAYS.
A-RB (Antirust Bearings) ....................................................................................................35
Automatic Gunwale Stop ...................................................................................................36
Alarm (Gunwale) ................................................................................................................37
Programming Target Depth and Bottom Depth ..................................................................38
Finding the Target Depth ....................................................................................................40
Top-Down Mode Example ..................................................................................................41
Bottom-Up Mode Example .................................................................................................42
Winding In: Rakuraku Mode | Fixed Speed Mode ..............................................................43
Jigging Mode .....................................................................................................................45
Handing Instructions ..........................................................................................................47
Specifications .....................................................................................................................50
Troubleshooting .................................................................................................................52
Product Inquiries /After Sales Service Information ..............................................................54
Service network ..................................................................................................................55
Advertisement
Table of Contents
Related Manuals for Shimano DendoUmaru 1000 Plays
Summary of Contents for Shimano DendoUmaru 1000 Plays
-
Page 1: Table Of Contents
INSTRUCTION MANUAL Thank you for purchasing a Shimano DENDOUMARU 1000 PLAYS / 4000 PLAYS. Before using this reel, please make sure you read the manual thoroughly and keep it in a safe place for future reference. Safety Precautions ........................2 A-RB (Antirust Bearings) ....................35 Features ..........................8... -
Page 2: Safety Precautions
Safety Precautions Please read these safety precautions before using the reel. Warning Warning • If the circuit breaker in the reel is tripped repeatedly, Caution: it is possible that the specifications of the reel are High Temperature not appropriate for the load from that particular species of fish or rig. - Page 3 Warning Warning • Immediately remove the power cable if you Don’t get your Warning see moisture or water droplets on the inside finger caught! of the display. If you continue to use the reel in such a situation it may malfunction, •...
- Page 4 Caution Caution • When using the reel, if the display goes off, do not • If the surface of the coating on the reel comes off or wind the line in manually using the handle as this if the surface of the material comes off due to a will mean there will be a difference between the strong impact leaving a sharp edge, do NOT touch Caution...
- Page 5 Caution Caution Caution: Caution Caution Rotating Objects • Do NOT put your finger • Please store and use the reel • The reel may malfunction if near rotating parts such out of the reach of children. it is dropped and the display as the spool as this can damaged due to the impact.
- Page 6 Caution Caution Do NOT Caution Disassemble • ALWAYS remove the cable • ALWAYS remove the cable • Please do not modify the reel from the battery when from the battery when as this can cause performance carrying out maintenance on carrying out maintenance on to deteriorate and safety the reel when it is in use as...
- Page 7 If there is no licensed Shimano dealer nearby, please enquire as to the location of your nearest service center.
-
Page 8: Features
Lightweight and Compact The new SLSII system requires no programming. Switch between SLSII (Shimano Line Program System 2) high speed and high power. High Speed High Power Pages 16~27 Consistently position your rig more accurately at the desired depth. - Page 9 Select between The following icons appear in the manual Surface-Down and Bottom-Up Modes and have the following meanings: for the display. Pages 40~42 Surface-Down/ Press the Bottom-Up Depth can be shown as distance from the surface or distance from Modes button indicated Press the button the bottom to best suit factors such as fishing ground, fishing...
-
Page 10: Digital Display Component Names
Digital Display Component Names Bottom-Up Mode Auto Casting Function (Icon: 底 In Bottom-Up Mode --- will be displayed to the left of the When lowering the rig, the motor will start automatically Bottom-Up icon. 5m past the gunwale stop position and spool resistance If --- is not displayed then the reel is in Top-Down Mode. -
Page 11: Part Names
Part Names Technical Lever Allows you to instantly adjust retrieval speed and Rakuraku Mode tension settings. Technical Lever After gunwale stop, if you want to restart the motor, then turn the lever to the OFF position once before restarting. In the interests of safety, however, this does not work if the counter displays 1.0m or less even if the lever is moved to the ON position. -
Page 12: Menu Button Operation
Menu Button Operation Standard Mode The Menu Button is used to set the following functions: This is the mode used when actually fishing. Icons with a flashing --- on the left When you turn the reel ON you will be in this mode. are ON. - Page 13 Menu 1: Bottom-Up Mode Bottom-Up Press Menu to go will flash. to the next Menu. Press Menu to Press 0 Set|Enter go to the next to turn Menu without the function making any ON or OFF. changes. Press Press The example here This will confirm shows how to turn the change and...
-
Page 14: Power Supply | Cord
NEVER use a battery charger. be changed every 2~3 years. Caution BATTERY Using a power cord other than a genuine Shimano item may cause the reel to BATTERY BATTERY BATTERY malfunction. Please do not treat the power cord in a rough manner, stand on it... - Page 15 Connecting a Battery Please use the supplied power cord to connect to the battery. Firstly connect the red connector to the positive electrode and the black connector to the negative electrode. Next connect the power cord to the reel. Line up the connections and insert the power cord into the socket in the bottom of the reel, pushing it firmly in and then tightening the lock screw.
-
Page 16: Learning Methods
Learning Methods (Entering the actual line length into the reel.) Spooling Up the Line Selecting Learning Methods Firstly, change from standard mode to learning mode as shown Feed the line through the level winder. below. Be sure to select the learning method that best matches When threading the line, use the threading pin provided. - Page 17 Standard Mode Used when actually fishing. * Carry out this operation when the The reel is in this mode when initially turned ON display shows less than 6m. Please reset the counter if the value displayed is greater than 6.1m. Press Enter and Memo at the same time for more than 3 seconds to enter Learning Mode.
-
Page 18: Learning Methods (Flow Diagram)
Learning Methods (Flow Diagram) Before winding line, please look though the following flowchart to gain an understanding of the overall process. There are 3 Learning Modes. Please see the following pages for more details. * This operation cannot be carried out unless a power supply is connected. When NOT using a backing line. - Page 19 When using backing line. Use the Line Level Guide on the spool when winding on 0.23mm-265m of line (0.32mm-520m for the #4000). (See Pages 24~27) ① Hold Enter Backing Line Hold Enter. and Memo Start~Finish at the same time. Use the Technical ②...
-
Page 20: Learning Methods 1. Pe Line (Line With Markings Every Meter.)
Learning Methods (Inputting the actual value of the line use into the reel.) PE Line (Line with markings every meter.) → Use Normal Learning. ( 学習 ) Please see Pages 22~23 when winding lines such as nylon (line with no markings every meter). Learning can also be carried out using backing line. - Page 21 Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ. Peep-Peep Peep-Peep Wind on 10m Remove 10m Hold Hold After completely finishing winding line, The display will return to Standard Mode The number of spool revolutions will be displayed in the bottom right of the display (the area shown press Enter for more than 3 seconds.
-
Page 22: Learning Methods 2. Nylon Line (Line With No Markers.)
Learning Methods (Inputting the actual value of the line use into the reel.) Nylon Line (Line with no markers.) → Use Normal Learning. ( 学習 ) The number of Peep-Peep spool revolutions is displayed. Use the Technical Lever Press At the Same Time Press Enter to wind on the line. - Page 23 Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ. Peep-Peep Wind on 10m Tie on 10m of line. Pull it out and remove it. Hold Tie on 10m of line.
-
Page 24: Learning Methods 3. Backing Line
Learning Methods (It is also possible to use Learning for backing line.) Please use the Line Level Guide and Backing Line Learning ( 下巻 ) when winding on 0.23mm-265m of line (0.32mm-520m for the #4000). The number of spool revolutions Wind on backing line until is displayed. - Page 25 Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ. Peep-Peep Wind on 10m Tie the main line Hold to the backing line. When backing line learning has finished, The alarm will sound (peep-peep) and the display Accurately wind on 10m of main line.
- Page 26 Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ. The number of Peep-Peep spool revolutions is displayed. Use the Technical Lever to wind on the line. Please ensure that winding tension is set at 3.
- Page 27 Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ. Peep-Peep Peep-Peep Wind on 10m Hold Remove 10m The alarm will sound (peep-peep) and the display The number of spool revolutions will be displayed The display will return to Standard Mode will appear as shown in the diagram.
-
Page 28: What To Do After Completing Learning
What to do after completing Learning Auto Depth Basic Technical Reset Lever Alert Technical Auto Depth Zero Reset All you need to know in Lever Alert order to use the reel. Gunwale Stop Gunwale Stop Convenient Press one button to Zero your 底... - Page 29 Surface-Down/ Rakuraku Mode Jigging Bottom-Up | Fixed Speed Mode Modes Mode Jigging Change between Change between Top-Down Rakuraku Mode Bottom- Mode Fixed Up modes. Speed Mode. The spool rotates at a constant speed in Fixed Speed Mode. Switch between Modes 棚...
-
Page 30: Various Techniques
Various Techniques (You will want to learn these techniques to improve your catch.) Drop Your Rig Quickly Technique This is an especially effective technique when fishing for squid. • Normally, the mechanical brake knob is tightened to slightly brake the free rotation of the spool to prevent backlash due to the up/down movement of the vessel. - Page 31 Cancelling the Auto Casting Function When a power source is connected the Auto Casting Function will be in operation. Use the procedure shown below to turn off this function if guide resistance or backlash is a problem. With the motor stopped and the reel in Standard Mode, press Menu twice. 糸送...
-
Page 32: Zero Setting
Zero Setting (Always do this before you start fishing.) Accurately reach your target fishing depth. Reset If you want to improve your catch you must be able to position your rig accurately at the target depth. Zero setting resets the counter to zero when the rig is on the surface. Zero setting enables you to know the depth of the rig and to accurately position it at the target depth. - Page 33 Let’s Try Zero Setting Peep-Peep Hold Lower the rig to the surface and press 0 The alarm will sound (peep-peep) and Zero setting is complete. Set for more than 3 seconds. the display will change as shown above. Caution * It may not be possible to zero the counter if Jigging Mode is ON. Always turn Jigging Mode OFF before zeroing the counter.
-
Page 34: Adjusting Smart Line Depth
Adjusting Smart Line Depth This function allows you to easily return your rig to the same depth Smart Line after repairing your line if it breaks. Depth Peep-Peep Hold If you break your line, after repairing it, The display will change as shown above. The computer will automatically return lower your rig to the surface and press your rig to the same depth it was at... -
Page 35: A-Rb (Antirust Bearings)
A-RB (Antirust Bearings) Bringing you even smoother spool movement. Antirust A corrosion-resistant metal is densely packed onto the surface of both ends of the spool using surface Bearings reforming technique. This creates a stable immoveable layer that ensures constant protection. Due to highly rust-resistant bearings (A-RB) inside the unit, lowering the hook has become even easier. -
Page 36: Automatic Gunwale Stop
Automatic Gunwale Stop When the motor stops, just raise your rod vertical and the rig will come straight to your hand. Gunwale Stop You can set the reel so that when the motor stops retrieving the line you just need to raise your rod vertical to have the rig come straight to your hand. -
Page 37: Alarm (Gunwale)
Alarm (Gunwale) The alarm will sound 4m before the Gunwale Stop Position. Peep Peep Peep-Peep Peep-Peep 4m before the Gunwale Stop Position the alarm will sound At the Gunwale Stop Position (in this case at 6.0m) the alarm every 2m. will sound (peep-peep) and the motor will automatically stop. -
Page 38: Programming Target Depth And Bottom Depth
Programming Target Depth and Bottom Depth The Auto Depth Alert can be programmed automatically or manually. Auto Depth Alert Auto Manual Peep Peep-Peep Press Hold Any depth past 6.1m where the rig stops for more than 6 seconds is automatically saved as the target depth and is shown in the bottom right hand corner of the display when the rig Lower the rig to the target depth (6.1m or... - Page 39 The alarm will sound 4m before the saved depth. Peep Peep Peep-Peep When lowering the hook the alarm will sound (peep) every 2m At the saved depth (in this case 100m) the alarm will sound from 4m before the saved depth. (peep-peep).
-
Page 40: Finding The Target Depth
Finding the Target Depth Choose between Changing Mode Surface-Down/ Top-Down and Bottom-Up Modes Bottom-Up When the power is turned ON the reel will Modes be in Top-Down Mode. Use the procedure shown below to change modes. The secret to improving your catch is being fishing technique and target species, this able to accurately position your rig at the position may be given as the distance from... -
Page 41: Top-Down Mode Example
Top-Down Mode Example • The skipper indicates that the fish are at a depth of 55m. Wind Up Peep Peep Wind Up Target Peep Peep-Peep through the Target Zone Zone Target Zone Find the Bottom Bottom Allow the rig to drop to the bottom. Wind the rig up to the target depth. -
Page 42: Bottom-Up Mode Example
Bottom-Up Mode Example • The skipper indicates that the fish are 2m Once the rig reaches a depth of from the bottom. 10m the display will automatically change to Top-Down Mode to give an indication of how far it is from Initial Drop Subsequent the Gunwale Stop Position. -
Page 43: Winding In: Rakuraku Mode | Fixed Speed Mode
Winding In: Rakuraku Mode | Fixed Speed Mode Rakuraku Mode | Fixed Speed Mode Changing between Rakuraku Mode Technical Lever Present Mode and Fixed Speed Mode Rakuraku Mode: Green backlight (楽 is displayed). Fixed Speed Mode: Orange backlight (速 is displayed). •... - Page 44 It also has the following advantages… What is Rakuraku Mode? • It can handle any kind of fishing other than live bait fishing. Rigs with only a light load can be recovered at maximum speed Rakuraku Mode maintains line tension at the level you set. without having to worry about adjusting motor speed, which In other words, the reel senses the tension (load) on the line makes life easy and means that you can concentrate on fishing.
-
Page 45: Jigging Mode
Jigging Mode The reel can replicate the popular jigging function. Jigging This is particularly handy when you want to fish all day using this technique. Mode Flash is displayed. Press Menu repeatedly until さそい flashes Press Menu repeatedly L1 is displayed. until L1 is displayed. - Page 46 Caution: The settings and values shown on the display are for illustration purposes only. Actual settings and values may differ. Start Jigging seconds flashes in さそい Jigging Mode. seconds L1 is displayed. Select from 27 speeds in Retrieve at speed 28 in seconds Fixed Speed Mode.
-
Page 47: Handing Instructions
Handing Instructions This reel consists of precision electrical components. Please read and follow way as if the bearings were rusty. It is almost impossible to remove dried salt from inside the bearings and even though Anti-Rust Bearings are used there is the instructions below. - Page 48 Precautions Maintaining Your Reel • • One of the characteristics of powered reels is that even though the Regular Maintenance - Please contact your nearest service center. motor is ON, sometimes line will not get wound in if a fish is hooked The condition of the reel is greatly influenced by not only frequency because the drag is slipping.
- Page 49 • Figure 2. The worm shaft and sides of the worm shaft. Please use Shimano Reel Grease to extend the life of your reel. Apply the grease at the locations shown in Figure 1 and 2. Shimano Genuine Reel Grease Spray (SP-023A) Figure 1.
-
Page 50: Specifications
Specifications DENDOUMARU 1000 PLAYS specifications: Maximum Maximum Actual Maintainable Maximum Drag Actual Winding Speed Winding Strength Winding Speed Winding Strength 25.0 1kg (Load) 2kg (Load) 3kg (Load) m/min. 241N 49.0N m/min. m/min. m/min. 41.2N Reference Maximum drag for Retrieval speed when The time required for bringing a rig to the surface from 100m. - Page 51 The time required for bringing a rig to the surface from 100m. The winding strength that can be maintained Shimano boat reels winding the line in Actual winding speed is for example, is the speed at which a specific for an extended period...
-
Page 52: Troubleshooting
Troubleshooting Situation What to do Reference The display is black or shows This happens when the unit is left somewhere at high temperature, such as in a car boot. It all characters. will return to normal when the temperature goes down. Check to see if the (+) and (--) of the power cord are connected properly to the battery. - Page 53 Situation What to do Reference Make sure all the screws on the power cord connector are at the connector. If the boat’s P.14 The motor stops while winding. power supply terminal or the reel’s power cord connector is rusty, the current will not flow properly.
-
Page 54: Product Inquiries /After Sales Service Information
Part Name: Handle • Shimano retains fundamental parts (i.e. the parts necessary to maintain the function of the product) for fishing rod for up to 6 years after the manufacturing of a particular model is stopped. We may not accept a request for the repair if parts are not available. -
Page 55: Service Network
Service network PRINTED IN JAPAN www.shimano.com IMPRIME AU JAPON (100521) - Page 56 • Line Threading Pin (110218)
Need help?
Do you have a question about the DendoUmaru 1000 Plays and is the answer not in the manual?
Questions and answers