Learning Method; Learning Mode; Specify Mode - Shimano DENDOUMARU 4000HP Instruction Manual

Learning Method

Line setting
1
Pass the line through the level winder.
When passing the line, use the line-
passing pin supplied.
2
Tie the line to spool pin.
The recess of power cord to the
protruding reel power connector, then
press in and fasten the screw.
Line passing pin Spool pin
Mode switching
Every time you press the mode switch, it will switch as shown below.
Select the mode that matches the type of line used. (See explanation in the next page).
To operate it, power source 12V must be connected
Motorized Standard mode
Press once
Used in actual fishing. When
power is ON, this is the condition.
Beep beep
Return to
Standard mode
Wind-down mode
Press once
Not applicable to
this model specifications.

Learning mode

Beep
Press once
The reel will learn using
the supplied line.

Specify mode

Beep
Press once
Used for winding Shimano
ANTARES 50lbs.-600M
Beep
7