Using The Program Mode - Shimano BeastMaster 9000 Instruction Manual

Using the Program Mode

Finally, try out the program pattern that you have set.
Program Mode
1
Set Program Mode to ON, referring to pages
50–54.
If the Menu Screen is displayed, select RETURN to
switch to the Water Depth Display.
Note: All settings and values shown here are for
instructional purposes only. They are not intended
to be actual settings or values.
Start program! Start program!
(Program in operation) (Program in operation)
Displayed while
program is in
operation.
Press
ON/OFF
2
Lower the rig to the target depth and
press the PGM button to repeatedly
perform the saved program pattern.
While the program pattern is in operation, [PGM]
will be displayed on the Water Depth Display.
※ When Program Mode is ON, Pick Up Mode is
automatically turned OFF.
To pause and restart the program pattern,
press the PGM button.
※ After gunwale stop, the motor stops.
(Continued on the next page.)
55