Rig Retrieval Time - Shimano BeastMaster 9000 Instruction Manual

Rig Retrieval Time

When retrieving the rig under power, this displays the time remaining
for the rig to be retrieved to the Gunwale Stop Position.
Rig Retrieval
Time
Use the procedure shown below to turn ON this function.
Hold
1
When the power is turned on, Rig Retrieval Time
is set to OFF. The illustration shows the Water
Depth Display with Rig Retrieval Time OFF.
At the Water Depth Display press and
hold the MENU button
the Menu Screen will appear.
Note: All settings and values shown here are for
instructional purposes only. They are not intended
to be actual settings or values.
58
Peep
（current setting）
ワンタッチ
Press several times Enter
2 P r e s s ▼ s e v e r a l t i m e s a n d s e l e c t
T I M E R .
The current setting appears to the right of the
function name.
for 3 seconds and (Settings shown here are for instructional
purposes only.)
Press SET to display the Rig Retrieval Time
menu.
Use ▼▲ to choose either ON or OFF, then
press SET to complete the setting.
Please see Pages 12 for details regarding menu
button operation.
ワンタッチ
Select Enter
When retrieving the rig under power, this
displays the time remaining for the rig to
be retrieved to the Gunwale Stop Position.
The display can show a maximum of 99'59
(99 minutes and 59 seconds). For times
longer than that the display will flash
99'59.
Display during Display during
electric retrieval electric retrieval
The time remaining for the rig to be
retrieved to the Gunwale Stop Position.
(minutes) (seconds)