Program Mode - Shimano BeastMaster 9000 Instruction Manual

Program Mode

Replicates pro-angler reeling patterns or your own programmed technique
Program Mode
Hold
1
When the power is turned on, Program Mode is
set to OFF.
At the Water Depth Display press and
hold the MENU button for 3 seconds and
the Menu Screen will appear.
Note: All settings and values shown here are for
instructional purposes only. They are not intended
to be actual settings or values.
50
Peep
ワンタッチ
Press twise Enter
2 Press ▼ twice to select PROGRAM.
The current setting appears to the right of the
function name.
(Settings shown here are for instructional
purposes only.)
Press SET and the Program menu appears.
Use ▼▲ to choose either ON or OFF, then
press SET.
(See pages 12 for details regarding Menu Screen
operation.)
When set to ON,
at the next screen
you can select
the program pattern number.
ワンタッチ
Select Enter
3
When set to OFF, you will return to the Menu
Screen and the setting is complete.
When set to ON, at the next screen you
can select the program pattern number.
Program patterns 1–3 are preset patterns
as described on the opposite page, while
4 and 5 you can program with your own
techniques.
P a t t e r n s 4 a n d 5 a r e f a c t o r y s e t a t d e a d
slow winding. You can overwrite these by
programming in a new pattern.