Shimano BeastMaster 9000 Instruction Manual page 25

Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ.
Hold
7
Press the MENU button for more than 3
seconds.
The alarm will sound (peep-peep) and the display
will appear as shown in the diagram.
winding tension is set
Peep-Peep
Use the Technical Lever
to wind on the line.
with the number of spool
8
Use the Technical Lever to wind on the line.
A number corresponding to the number of spool
revolutions will be displayed.
Operate at a winding tension of 3.
This value indicates the force (line tension) applied
for winding the reel as a number. The number does
not equal kilograms. In addition, it will differ from
the value which appears in Rakuraku Mode.
When winding using the Technical Lever, the
speed can be adjusted using the Technical
Lever. To stop winding, set the Technical Lever
to the " O FF" position.
Please ensure that
at 3.
Changes in accordance
revolutions.
9
After completely finishing winding on the
line, press the 0 SET button for more than 3
seconds.
The alarm will sound (peep-peep).
Note:
Do not wind on all of the line. If all of the line is
wound on, it will cause an error in the counter
value.
Peep-Peep
Hold
(Continued on the next page.)
25