Shimano BeastMaster 9000 Instruction Manual page 53

Caution: The settings and values shown on the display are for illustration purposes only. Actual settings and values may differ.
• Learning Using the Handle
Turn the handle at the desired speed and then
rest for as long as you want.
If you take too long to turn the handle (more
than 2 seconds for a single turn) then this will not
be recorded.
If the spool turns faster than the maximum
speed using the Technical Lever, then this will be
recorded as the maximum speed for the Technical
Lever.
• Learning Using the Technical Lever
Retrieve the line at the speed and timing you
desire and then rest for as long as you want.
This is only possible in Fixed Speed Mode.
The distance the line is
retrieved in one movement.
4
Review the technique (winding and rest
times) recorded using the Technical Lever
or the handle.
Learning starts when winding begins and
at the same time the number of seconds
remaining is shown on the display.
The distance the line is retrieved in one
movement is shown in the center of the
display.
(Continued on the next page.)
53