Digital Display Component Names - Shimano BeastMaster 9000 Instruction Manual

Digital Display Component Names

Technical Lever Settings
Displays Rakuraku mode and Fixed Speed Mode values.
Top-Down timer
Displays the elapsed time after the rig reaches the target depth
from the surface.
* Times from 0 to 59 seconds are displayed in units of 1 second, and
from 1 to 99 minutes in units of 1 minute.
When the time reaches 100 minutes, the display returns to 0
seconds.
Lowering speed display
Displays the estimated lowering speed.
* "( )" will flash in the display.
Spool Free Mode
When in Spool Free Mode, the brackets disappear.
Saved Depth
In Top-Down mode, the saved depth is displayed, and in
Bottom-Up mode, the saved depth is displayed as zero.
PICK UP/PGM (Program) Button
When Pick Up Mode is ON, the line will be wound in by motor for as
long as the button is pressed.
Winding speed can be adjusted from 0 to Hi. (Default setting is 15.)
Press
* When Pick Up Mode is ON, Program Mode is automatically turned OFF.
* After gunwale stop, Pick Up is deactivated.
When Program Mode is ON, the movement pattern will start.
Use this button also to pause and restart.
* When Program Mode is ON, Pick Up Mode is automatically turned OFF.
Press
* After gunwale stop, Program Mode is deactivated.
• All items on the LCD shown here are displayed for instructional purposes only.
Present Depth
Displays depth from the surface of the water.
* Depth is shown in 10cm graduations.
Depths over 100m are shown in 1m graduations
as shown below.
Indication of Current Function
Program pattern in operation:
[PGM] is displayed.
Switch to Rakuraku Mode:
The alarm beeps and (R) is displayed for 3 seconds.
Switch to Fixed Speed Mode:
The alarm beeps and (S) is displayed for 3 seconds.
Low Charge Warning
If the charge is insufficient,
(Charge status can be checked any time from the
Menu Screen.)
0 Set/Enter Button
Zeroing the Counter
Lower the rig to the surface of the water and zero the counter.
* It may not be possible to zero the counter if Jigging Mode is ON.
Hold
Always turn Jigging Mode OFF before zeroing the counter.
Press Enter to turn ON or OFF the function selected using the Menu
button.
Press
will flash.
(Continued on the next page.)
11