Shimano BeastMaster 9000 Instruction Manual page 32

Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ.
Remove
10m
10
Accurately pull out 10m of line. (Check
the changes in colour every 10m, or the
number of marks occurring every 1m.)
To finish learning, press the0 SET button
for more than 3 seconds.
The alarm will sound (peep-peep).
32
Peep-Peep
11
The display will return to Standard Mode
and learning will be complete.
(In some cases there may be as much as a ±3%
difference between the counter value and the actual
length of the line.)
* This difference is the difference in the first cast
made after learning.
* After this when actually fishing, if you think that
the difference is too great, carry out Line Learning
Adjustment as shown on pages 61. This will
enable you to position your rig more accurately.
Wind on 10m
12
Wind on the 10m of line that was pulled
out.