Shimano BeastMaster 9000 Instruction Manual page 62

Caution: The values and settings shown on the reel display in this manual are in some cases just examples. Actual values may differ.
Align the actual position
of the line marker with the
water surface
3
Adjust the display to match the actual
position of the line (30m in this example) on
the surface of the water.
* Using the motor (winding in the line or hooking a
fish, etc.) will also cancel the adjustment. When that
happens, the previous adjustment setting will be used.
Press MENU to complete the adjustment.
The alarm will sound (peep-peep). The
display will return to Standard Mode and
the adjusted depth will be shown on the
display.
62
Peep-Peep
Press
From the Menu Screen
After the calibration is complete you will return
to the Menu Screen.
Select RETURN on the Menu and you will return
to the Water Depth Display and the calibrated
water depth will be shown.
Even if the power is turned OFF, Line Learning
changes will be saved.
Using the buttons
After the calibration is complete you will return
to the Water Depth Display.
The calibrated water depth is shown on the
Current Water Depth Display.