Zero Setting(Always Do This Before You Start Fishing.) - Shimano BeastMaster 9000 Instruction Manual

Zero Setting
(Always do this before you start fishing.)
Accurately reach your target fishing depth.
If you want to improve your catch you must be able to position your rig accurately at the target depth.
Reset
Zero setting resets the counter to zero when the rig is on the surface.
Zero setting enables you to know the depth of the rig and to accurately position it at the target depth.
* Do NOT wind too much line onto the spool as this can cause inaccurate readings when setting zero in one of the Learning Modes.
* If you carry out zero setting when the depth display shows 10.1m or more, line breakage compensation will be carried out.
The counter can be reset to 0m when the rig is on the surface.
(Continued on the next page.)
37