Configure The Network Parameters - CyberData 011111 series Operation Manual

2.3.4 Configure the Network Parameters

1. Click the Networking button to open the Network Configuration page
2. On the Network Configuration page, enter values for the parameters indicated in
Web Page Item
IP Addressing
Network Settings
IP Address
Subnet Mask
Default Gateway
Operations Guide
Figure 2-21. Network Configuration Page
Table 2-8. Network Configuration Parameters
Description
Select either DHCP IP Addressing or Static IP
Addressing by marking the appropriate radio button. If you select
Static, configure the remaining parameters indicated in
you select DHCP, go to
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
930260L
Installing the VoIP Indoor Intercom
(Figure
Step 3.
CyberData Corporation
30
Parts List
2-21).
Table 2-8.
Table 2-8
. If