Announcing The Ip Address - CyberData 011111 series Operation Manual

2.2.7 Announcing the IP Address

To announce a speaker's current IP address, first determine if you have an Intercom with an RTFM
switch
• If you have an Intercom that has an RTFM switch, then see
RTFM
• If you have an Intercom that has a jumper and does not have an RTFM switch, then see
2.2.7.2, "Intercom with a Jumper and No RTFM
2.2.7.1 Intercom with an RTFM Switch
1. If you have an Intercom with an RTFM switch, then press and hold the RTFM switch
(Figure
2. Release the Call Button after the IP address is announced.
Operations Guide
(Figure 2-13), and then do one of the following:
Switch".
2-13) until the IP address is announced.
Switch".
Figure 2-13. RTFM Switch
930260L
Installing the VoIP Indoor Intercom
Section 2.2.7.1, "Intercom with an
CyberData Corporation
16
Parts List
Section