Tech Tips; Servicing The Ice Bin Auger Assembly - KitchenAid 2003 M Technical Education

SERVICING THE ICE BIN AUGER ASSEMBLY

1. Open the freezer door.
2. Remove the ice bin from the door by
pressing in on the release button and
lifting it off the platform.
3. Place the ice bin on a work surface with the
bottom facing up.
Release Button
AUGER DISASSEMBLY
1. Insert a screwdriver handle into the auger
blade area to prevent the blades from
turning when you remove the screw in the
next step (see the photo at the top of the
right column).
2 Remove the screw from the auger assem-
bly coupling, and pull the coupler and flat
washer off the end of the shaft. NOTE: The
screw may be difficult to remove if there is
sealant applied to the threads.

TECH TIPS

Screw, Coupler, &
3. Turn the ice bin over to its upright position.
4. Remove the two screws from the auger
mounting plate.
8-1
Flat Washer
Screwdriver Handle
Auger Mounting
Plate Screws
Continued on the next page.