KitchenAid 2003 M Technical Education page 56

c) Repeat the previous step for the other
corner of the front panel.
d) Pull the bottom of the front panel out
and then down to remove it from the
dispenser.
Pull Out At Bottom
5. To remove the dispenser:
a) Disconnect the wire connectors from
the switch pack terminals and remove
the front panel. NOTE: The wire colors
are marked next to each terminal on the
switch pack.
Switch Pack
(10 Connectors)
Front Panel
4-32
b) Push the two locking tabs to unlock
them and pull the dispenser switch as-
sembly down and forward.
2 Locking Tabs
Dispenser Switch Assembly
c) Disconnect the three wire connectors
and the ice door heater ribbon cable
from the dispenser switch assembly
and remove the assembly.
Ribbon Cable
3 Connectors
Dispenser Switch Assembly