KitchenAid 2003 M Technical Education page 53

9. To remove the water valve:
a) Push in on the John Guest retaining
rings and remove the two water outlet
tubes from the water valve.
b) Disconnect the electrical connectors
from the water valve solenoids and
remove the water valve. NOTE: The
electrical connectors have different
sized terminals so that they cannot be
interchanged on the solenoids.
Water Valve
Electrical Connectors
Water Outlet Tubing
10. To remove the water reservoir:
a) Push in on the John Guest retaining
ring and remove the water reservoir
tubing from the water valve.
b) Remove the other end of the water
reservoir tubing from the John Guest
union.
Water
Reservoir
Tubing
c) Disconnect the water reservoir tubing
from the John Guest union at the bot-
tom of the refrigerator.
d) Remove the crisper and bottom shelves
from the refrigerator compartment.
e) Remove the hex-head screw from the
water reservoir tubing straps.
f) Pull the ends of the water reservoir
tubing up through the grommet.
Water Reservoir Tubing Straps
4-29
John Guest
Union
Pull Tubing Up Through Grommet
Water
Reservoir
Tubing