KitchenAid 2003 M Technical Education page 40

e) 36" Models Only: Remove the hex-
head screws from the right evaporator
cover mounting bracket and remove
the bracket. Be careful not to drop the
screws down the drain hole at the bot-
tom of the liner. Cover the hole with a
cloth.
Right Evaporator Cover
Mounting Bracket
NOTE: Be very careful not to over-bend
the refrigerant tubing.
f) Lift the evaporator up slightly and un-
hook it from the liner, then pull the
bottom of the evaporator toward the
front of the unit.
Lift & Pull Out
g) Bend the two hangers at the bottom of
the evaporator and remove the heater
from the hangers.
Bend The Two Hangers
h) Remove the foam block from the right
side of the evaporator.
4-16
Defrost Heater
Foam Block