KitchenAid 2003 M Technical Education page 45

c) Remove the screw from the cover and
remove the cover from the baffle hous-
ing.
Housing Cover
Housing
d) Pull the meat pan air baffle assembly
and thermistor out of the housing.
Meat Pan Air Baffle
Assembly
e) Disconnect the meat pan thermistor
connector from the harness.
f) Disconnect the four connector harness
assembly from the housing. NOTE: Make
sure that you reconnect the harness to
the indicated meat pan air baffle as-
sembly connector shown below.
Meat Pan Air Baffle Assembly
Harness Connector Here
Screw
Thermistor
Housing
Thermistor Connector
4 Connector
Harness
Assembly
4. To remove the air supply thermistor:
a) Remove the meat pan air baffle assem-
bly from the unit (see steps 3a & 3b).
b) Remove the four screws from the meat
pan air duct and remove the duct.
c) Remove the screw from the air supply
thermistor.
d) Disconnect the air supply thermistor
connector from the harness and re-
move the thermistor.
Harness Connector
4-21
Screw (1 of 4)
Meat Pan Air Duct
Air Supply Thermistor
Continued on the next page.
Screw