KitchenAid 2003 M Technical Education page 46

5. To remove the meat pan electronic
touch control assembly:
a) Remove the meat pan air baffle assem-
bly from the unit (see steps 3a & 3b on
page 4-20).
b) Remove the two screws from the bin
glide and remove the glide.
c) Remove the two screws from the deco-
rative cover and remove the cover.
Bin Glide Screws
Cover Screws
d) Remove the two screws from the meat
pan electronic touch control assembly.
Electronic Touch
Control Assembly
Decorative Cover
Screws
e) Lift the assembly from the bottom and
pull it out, then unclip the top and pull it
out so you can access the wiring.
f) Disconnect the two harness connec-
tors from the board and remove the
assembly.
4-22
2 Wire
Connectors