Checking Printing - MUTOH VJ-2638 Installation Manual

VJ-2638/1638/1638W Installation Manual
121 Lower the media loading lever.
No1 Name
1 Media loading lever
● When applying pressure on the media, lower
the media loading lever further.
No1 Name
1 Media loading lever
141 Close the front cover.
No1 Name
1 Front cover
• "User: TypeXX" (XX is a number between 1
and 30) is displayed on the operation panel.
151 Press the [+] key or [-] key to select the user
type setting.
VJ1638xE-I-03
161 Press the [Enter] key on the operation
panel.
• The user type setting is set.
• "Media initial" is displayed on the operation
panel and media initialization starts.
• After media initial operation is complete,
"Ready to Print" is displayed on the operation
panel and the display shifts to Normal.
171 Wind back the roll media with the Roll
media holder to remove a media bend.
No1 Name No1
1 Roll media 2 Roll media holder
• Media set is complete.
14
11.

Checking printing

conditions
Check the condition of the print head after the
ink replenishment.
11 Turn ON the printer and load the roll media.
10 Loading the roll media
11
Confirm that "Ready to print" is displayed
on Operation panel.
21 Press the [<] key on the operation panel for
two seconds or more.
• Nozzle check printing starts.
41 Check the sample print for blurred or
missing parts in the check pattern.
Name
51 If the nozzle check result indicates that
there is a problem such as mentioned
above in the check pattern, clean the head.
• Press and hold the [>] key on the operation
panel for two seconds or more.
• "Cleaning **%" is displayed on the operation
panel.
61 Head cleaning starts.