Items In The Stand Box; Procedure For Assembling; Attaching The Stand - MUTOH VJ-2638 Installation Manual

2.3

Items in the stand box

No1 Name
1 Leg part (Right)
2 Leg part (Left)
3 Base parts
4 Connector bar
5 Waste fluid tank holder
6 Hexagon socket head cap screws
7 Waste fluid tank holder fixing screws
8 Butterfly screws
9 Hexagonal wrench
3. Assembling
This section explains how to assemble the
printer.
Four or more people are required to
・
assemble this printer1
3.1

Procedure for assembling

the stand
Follow the procedure below to assemble the
stand.
11
Follow the procedure below to assemble
the right stand.
a1 Attach the right leg part to the right base
part so that four screw holes in the base
part are at the front.
b1 Tighten two hexagon socket head cap
screws using a hexagonal wrench.
No1 Name
Q'ty
1 Leg part (Right)
1
2 Base part
1
2
1
1
11
Assemble the left stand in the same way as
8
in Step 1.
4
8
1
No1 Name
1 Leg part (Left)
2 Base part
VJ-2638/1638/1638W Installation Manual
21
•
No1
41
No1
51
No1 Name
3 Hexagon socket head
cap screws
4 Screw holes in base part
No1
61
3.2
Follow the procedure below to attach the stand
to the printer.
11
No1 Name
3 Hexagon socket head
cap screws
4 Screw holes in base part
No1
3
Fasten the connector bar to the right stand
using two hexagon socket head cap screws.
Attach the connector bar with the groove
facing the rear as shown below.
Name No1
1 Stand (Right) 3 Hexagon socket head
cap screws
2 Connector bar 4 Groove in connector bar
Fasten the connector bar to the left stand
in the same way as in Step 3.
Name No1
1 Stand (Left) 3 Hexagon socket head
cap screws
2 Connector bar
Attach the waste fluid tank holder to the
right stand using four screws.
Name No1
1 Leg part (Right) 3 Screws
2 Waste fluid tank holder
Shake the stand to make sure that each
part is firmly attached.

Attaching the stand

Turn the four adjusters as shown below to
prevent the stand from moving.
Name No1
1 Adjusters 2 Stand
VJ1638xE-I-03
Name
Name
Name
Name