MUTOH VJ-2638 Installation Manual page 11

• When all the ink cartridges are installed, "Ink
Refill **%" is displayed on the operation panel
and ink replenishment starts.
• Initial filling takes time as follows.
• VJ-2638: about 20 minutes
• VJ-1638: about 17 minutes.
• Ink filling operation and pause operation
are repeated during the ink replenishment.
• W h e n " 1 0 0 % " i s d i s p l a y e d , t h e i n k
replenishment is complete.
• After the ink replenishment is complete,
"Media End" is displayed on the operation
panel.
D o n o t p e r f o r m t h e f o l l o w i n g
・
operations during ink filling1 If filling
is interrupted,ink will be lost when
filling is resumed1
Do not turn OFF the power of the
•
printer1
Do not unplug the power cable of
•
the printer1
Do not open the front cover1
•
Do not open the maintenance cover1
•
Do not raise the media loading
•
lever1
● If the printer performs the nozzle check
p r i nt i n g i m m e d i ate l y a f te r i n i t i a l i n k
replenishment is complete, the following
results may occur.
Printed lines become blurred.
•
The data is partially not printed.
•
In such cases, follow "6.2.3 Head
cleaning" and refill a small amount of
ink. Then, check the printing result.
● If there is no improvement in the print result
even after refill a small amount of ink, leave
the printer unused for an hour or more. Then,
refill a small amount of ink again and check
the print result.
If there is still no improvement, contact
your local MUTOH dealer.
9.3 Installing high capacity
pack adapters (option, VJ-
2638/1638)
Use the optional high capacity pack adapters to
use the 1000ml ink packs on VJ-2638/1638.
Follow the procedure below to install the high
capacity pack adapters.
11
Turn the printer ON.
• The printer starts the initializing operation.
• After the initial operation is compete,
"Start Ink Charge -- > E" is displayed on the
operation panel.
11 Press the [Enter] key on the operation panel.
• "Insert Cleaning cart." is displayed on the
operation panel.
21 Take out the cleaning fluid packs (8 pieces)
and smart chip cards(8pieces)from the bag.
41
Install the cleaning fluid pack and smart
chip card to the high capacit y pack
adapters.
● To install or remove the cleaning fluid pack
and smart chip card to/from the high capacity
pack adapter, refer to the operation manual
included with high capacity pack adapter.
51
Insert the high capacity pack adapters into
the ink cartridge slot.
● Make sure that the cleaning fluid pack and
smart chip are installed on the high capacity
pack adapter before inserting it to the slot. If
the high capacity pack adapters are inserted
into the slot without the cleaning fluid pack,
the remaining information will be rewritten
and the cleaning fluid pack will not be usable.
11
VJ-2638/1638/1638W Installation Manual
• Insert the high capacity pack adapter all the
way to the end of the slot.
No1 Name No1
1 H i g h c a p a c i t y p a c k 2 Ink cartridge slots
adapter
• When all high capacity pack adapters are
installed, "Busy-Washing" is displayed on
the operation panel, and the printer starts
charging the cleaning fluid.
• When the cleaning fluid has been charged,
"Remove Cartridges" is displayed on the
operation panel.
61 R e m o v e a l l t h e h i g h c a p a c i t y p a c k
adapters.
No1 Name
1 High capacity pack adapter
• "Busy-Washing" is displayed on the operation
pan el and the printer starts head cleaning.
• When head cleaning is complete, "Wash retry?
No" is displayed on the operation panel.
● Do not remove only cleaning fluid pack while
high capacity pack adapter is installed on
the printer. The information of the remaining
smart chip card will be rewritten and the
cleaning fluid pack will not be usable.
71
Press the [Enter] key on the operation
panel.
• "Insert InkCartridges" is displayed on the
operation panel.
VJ1638xE-I-03
Name