MUTOH VJ-2638 Installation Manual page 9

21
Select whether to perform cleaning of the
ink path before the initial ink charge.
● Cleaning may be required depending on the
ink type to be set.
●
To perform head cleaning, make sure to use
the cleaning liquid that matches the ink.
a1 When cleaning is required, press the [+]
key or [-] key to select "Yes".
b1 When cleaning is not required, proceed to
the step 8.
41
Press the [Enter] key on the operation
panel.
• "Insert Cleaning cart." is displayed on the
operation panel.
51
Take out the cleaning cartridge(8pcs) from
the bag.
61 Set the cleaning cartridge to the ink
cartridge slot.
• Keep the arrow of Cleaning cartridge facing
up and insert it into the printer.
No1 Name No1
1 Cleaning cartridge 2 Arrow
• Insert the cleaning cartridge all the way to
the end of the ink cartridge slot.
No1 Name
1 Cleaning cartridge
• If the head height is set to High, "Change
Head Gap Low" is displayed on Operation
panel. Set the head height to Low.
Operation manual "4.2.5.3 When
setting the head height to Low"
• When all cleaning cartridges are installed,
"Busy-Washing" is displayed on the operation
panel, and the printer starts charging the
cleaning fluid.
• When the cleaning fluid has been charged,
"Remove Cartridges" is displayed on the
operation panel.
71 Remove all the cleaning cartridges.
No1
1 Cleaning cartridge
• "Busy-Washing" is displayed on the operation
panel and the printer starts head cleaning.
• When head cleaning is complete, "Wash retry?
No" is displayed on the operation panel.
81
Press the [Enter] key on the operation
panel.
• "Insert InkCartridges" is displayed on the
operation panel.
Name
VJ-2638/1638/1638W Installation Manual
91
•
•
No1 Name
2 Ink cartridge slots
•
No1
•
Name
No1
•
•
•
•
・
9
Install Ink cartridges (K, C, M, Y: 2 each) in
Ink cartridge slots (K, C, M, Y: 2 each) on the
back of the printer.
Shake Ink cartridge two to three times gently before
inserting it into Ink cartridge slot.
Slots for ink cartridges are specified depending
on colors of the ink cartridges. Match the ink
color label with the ink color before inserting
Ink cartridges.
Keep the arrow of Ink cartridge facing up and insert
it into the printer toward the front side.
Name No1
1 Ink cartridge 3 Ink cartridge slot
2 Arrow 4 Ink color label
Insert the ink cartridge all the way to the end
of the ink cartridge slot.
Name No1
1 Ink cartridge 6 Ink cartridge slot M1
2 Ink cartridge slot K1 7 Ink cartridge slot M2
3 Ink cartridge slot K2 8 Ink cartridge slot Y1
4 Ink cartridge slot C1 9 Ink cartridge slot Y2
5 Ink cartridge slot C2
When all the ink cartridges are installed, "Ink
Refill **%" is displayed on the operation panel
and ink replenishment starts.
Initial filling takes about seventeen minutes.
Ink filling operation and pause operation are
repeated during the ink replenishment.
W h e n " 1 0 0 % " i s d i s p l a y e d , t h e i n k
replenishment is complete.
After the ink replenishment is complete,
"Media End" is displayed on the operation
panel.
D o n o t p e r f o r m t h e f o l l o w i n g
operations during ink filling1 If filling
is interrupted,ink will be lost when
filling is resumed1
Do not turn OFF the power of the
•
printer1
Do not unplug the power cable of the
•
printer1
Do not open the front cover1
•
Do not open the maintenance cover1
•
Do not raise the media loading lever1
•
VJ1638xE-I-03
Name
Name