Using Your Slow Cooker; Preparing Your Crock-Pot Slow Cooker For Use; Activating The Internal Clock Battery; How To Use Your Crock-Pot Slow Cooker - Crock-Pot MyTiMe Owner's Manual

Preparing Your Crock-Pot® Slow Cooker For Use
Before you use your slow cooker, remove all packaging components and wash
the lid and stoneware with warm soapy water and dry thoroughly.

Activating the Internal Clock Battery

Tools needed: Phillips #1 Screwdriver
1. Place the Heating Base upside down on a sturdy surface.
2. Loosen the screw on the battery compartment door as shown in QSG.
3. Grasp the pull-tab with your thumb and forefinger and pull straight out.
4. Tighten the screw on the battery compartment door.
5. The digital clock is now ready to be set.
Assembly
1. Place stoneware into the heating base.
2. Lower the lid horizontally down onto the stoneware.
How to Use Your Crock-Pot® Slow Cooker
Setting the Clock
1. Plug the power cord into a standard electrical outlet. Once the battery
plastic tab has been removed (see "Activating the Internal Clock Battery"),
the clock will flash on the control panel to indicate that no time has yet
been set.
2. Press and hold the HOUR and MINUTE buttons until you reach the
Using Your Crock-Pot® Slow Cooker
1. Add your ingredients to the stoneware, and cover with lid.
2. Plug in your Crock-Pot® slow cooker. The clock will display indicating
3. Press the POWER button to turn the unit on before selecting
MyTime_Full book_MECH.indd 8

Using Your Slow Cooker

current time.
that the unit is plugged in, but not turned on.
cooking method.
8
8/16/12 11:03 AM