For Manual Mode; For Smart Cook Mode; Usage Notes - Crock-Pot MyTiMe Owner's Manual

Using Your Slow Cooker

For Manual Mode:

1. After pressing the power button to turn the unit on press the MANUAL
SELECT button to toggle between the temperature settings.
2. When chosen temperature setting is illuminated press the START button.
NOTE: We do not recommend using the WARM setting for more than 4 hours.
3. To turn you or Crock-Pot® slow cooker off, press the POWER button and
unplug the unit from the outlet.

For Smart Cook Mode

1. After pressing the POWER button to turn the unit on press the SMART
COOK button to toggle between the food settings.
2. Set the READY AT clock by pressing and holding the HOUR and MINUTE
buttons until you reach the desired finish time.
NOTE: The READY AT clock starts 9 hours ahead of current time and can be
adjusted to complete cooking cycle anywhere between 6 and 12 hours
from the current clock setting.
3. Press the START button.
4. When the cooking time has completed, your Crock-Pot® slow cooker
automatically shifts to the WARM setting and the WARM light illuminates.
NOTE: The slow cooker may shift to warm up to 3-4 minutes later than READY
AT time due to clock round situations.
NOTE: Once the START button is pressed the READY AT clock and food selection
cannot be changed. To reset SMART COOK mode, press the POWER
button to turn the slow cooker off and then repeat steps 1-4 from above.
5. To turn your Crock-Pot® slow cooker off, press the POWER button and
unplug the unit from the outlet.

Usage Notes

• If there is a power outage, when the power is restored the display and
lights blink. All slow cooker settings have been cleared and must be reset.
However, the food may be unsafe to eat. If you are unaware of how long the
power was out, we suggest you discard the food.
9
MyTime_Full book_MECH.indd 9 8/16/12 11:03 AM