SureCall DualForce User Manual page 12

Installing Your Hardware
Step 3. Install the Inside Antenna
Inside antennas come in omni-directional (dome) and flat panel versions.
Required Between
Outside and Inside Antenna
Note:
As you can see from the table above, acquiring the recommended inside and outside antenna separation optimizes coverage significantly.
Any reduced antenna separation reduces the booster's coverage.
1. If your inside antenna is a dome type, mount it on the ceiling in a central location.
2. If your inside antenna is a flat panel, install it against a wall or surface projecting the area
where you want reception. Point the antenna away from the outside antenna.
To avoid interference stay a minimum distance of 3 feet from the panel antenna.
DualForce
Note:
see next page for outside antenna installation details.
12
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com
Amplifier gain
40dB
45dB
50dB
55dB
65dB
72dB
Optional 1- Inside Dome
Optional 2 - Inside Panel
Antenna Separation Table
Min. separation (ad)
5-6'
15-20'
50'
60'
75-80'
100'-110'