SureCall DualForce User Manual page 15

2g and 3g adjustable dual-band signal booster kit
Table of Contents

Advertisement

Booster Hardware
The following image shows the key hardware components on the cellullar booster.
Refer to this image as you install your DualForce kit components.
PCS - 1900 Dip-Swtich
DIP Switches and Lights
The DualForce Industrial booster has the following indicators and controls:
• PCS Uplink Warning light/DIP switches (1):These DIP switches control the PCS communications
with the cellular tower.
• PCS Downlink Warning light/DIP switches (2):These DIP switches control the PCS amplification
within the building.
• Power light (3): This light should be illuminated or blinking green at all times while the booster is
powered on.
• Cellular Downlink Warning light/DIP switches 4): These DIP switches control the cellular
amplification within the building.
• Cellular Uplink Warning light/DIP switches (5): These switches control the cellular communica-
tions with the tower.
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com
Installing your Hardware
N connector to outside antenna
Alert LED
Cellular - 800 Dip-Switch
Power Light (Green)
N connector to inside antenna
Programmer
On / OFF
Power Jack
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DualForce and is the answer not in the manual?

Table of Contents