ACKAGES OOSTER ARDWARE UMMARY AND ESCRIPTION OF AFEGUARD EATURES ELECTION NSTALLATION NSTRUCTIONS TROUBLESHOOTING FREQUENTLY ASKED QUESTIONS 12 OBTAINING TECHNICAL SUPPORT 12 WARRANTY SPECIFICATIONS SAFETY INFORMATION Flex Pro Booster, Flex Pro Omni Kit, Flex Pro Panel Kit (FLEX PRO) User Guide...
FCC new rules. Please contact FCC for details: 1-888-CALL-FCC. Changes or modifications not expressly approved by Cellphone-Mate could void the user’s authority to operate the equipment. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 3 All rights reserved.
Flex Pro Booster Hardware The following figure shows the key hardware components on the Flex Pro cellular signal booster. Refer to this figure as you install your SureCall Flex Pro components. Outdoor Antenna Connector (not shown) Power LED Alert LED...
Although cell phone providers try to place towers for maximum coverage, local ordinances and terrain features can restrict tower locations, which can limit signal strength at your location. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 5 All rights reserved.
Using the CM240 or CM400 cable, connect the inside antenna to the booster connector marked INSIDE (see page 4). Hand tighten the connection. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 6 All rights reserved.
Page 7
The booster is rated for 5-20V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 7 All rights reserved.
Page 8
If the inside coverage is not sufficient, you may need as much as 60 feet of separation. See the table above. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 8 All rights reserved.
Double-check all booster and antenna cable connections. Be sure your booster's dB gain is turned up to full power on each dial. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 9 All rights reserved.
Page 10
The Power LED does not Be sure the AC outlet is working and is not controlled by a turn ON. wall switch that can remove power from the outlet. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 10 All rights reserved.
Page 11
The booster shuts down automatically, and then restarts to flash. after 60 seconds. Turn down the Cellular-800 or PCS- 1900 dial that is oscillating to prevent the booster from shutting down automatically. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 11 All rights reserved.
FREQUENTLY ASKED QUESTIONS Frequently Asked Questions For a list of Frequently Asked Questions and a comprehensive, up-to-date Troubleshooting Guide, please visit our website at: www.surecall.com or call us at 1-800-365-6283. Obtaining Technical Support You can also consult a Cellphone-Mate technical specialist directly by emailing us at support@surecall.com...
Cellphone-Mate makes no warranty whatsoever in respect to accessories or parts not supplied by it. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 13...
Page 14
If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 14 All rights reserved.
N Female, both ends Power Consumption: Dimensions: 8 x 5 x 1.25 in. (20.32 x 12.7 x 3.175 cm.) Weight: 1.5 lbs (.68 kgs.) FCC ID (USA): RSNFLEXPRO SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 15 All rights reserved.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SureCall Flex Pro Home and Office Kit Cellphone-Mate, Inc. Page 16 All rights reserved.
Need help?
Do you have a question about the Flex Pro and is the answer not in the manual?
Questions and answers